Front view
Color
Your builds, organized
from box to display case.
Log every build step, track paint schemes, document techniques, and keep your reference photos in one place instead of scattered across your camera roll.
Built for builders
Your data is private
01
Kit inventory
Start with runners, manuals, and reference poses.
Track runner checks, missing parts, decal sheets, color guides, pose references, and any joint concerns before the first cut.
Main ComponentIn Progress5m3r
Front view
Back view
Cape drape
Detail SetPlanned3m3r
Boot detail
Construction detail
Trim paint
Material Sheets 6mm Project Grade
CraftSupplyShop
$12.99View on Etsy
materialsBuild checklist
Gather reference images
Source base patterns
Prototype test
Order materials
Project walkthrough
youtube.com
+
−
02
Build sequence
Plan snap build, cleanup, paint, decals, and topcoat.
Separate nub cleanup, sanding, seam removal, subassemblies, masking, panel lining, waterslides, and final coating so timing stays clear.
May 2026
Sun
Mon
Tue
Wed
Thu
Fri
Sat
1
Research starts
2
3
4
5
6
7
References done
8
Patterning begins
9
10
11
12
13
14
15
Mockup complete
16
Main assembly
17
18
19
20
21
22
Detail attachment
23
24
25
26
27
28
Assembly due
29
Paint & finishing
30
31
Upcoming
- May17
Main assembly
Today
- May22
Detail attachment
In 5 days
- May29
Paint & finishing
In 12 days
- Jun8
Final test & photos
In 22 days
Design
- Concept & mood boardCompleted
Apr 20 – Apr 25
- Research & referencesCompleted
May 1 – May 7
- Patterning / mockupCompleted
May 8 – May 15
Build
- Main assemblyIn progress
May 16 – May 28
- Detail attachmentUpcoming
May 22 – May 30
Finish
- Paint & finishingUpcoming
May 29 – Jun 6
- Final test & photosUpcoming
Jun 8 – Jun 10
03
Technique log
Remember what worked on each plastic finish.
Log panel line colors, decal setter, topcoat finish, tight joints, loose joints, sanding grit, weathering passes, and broken part fixes.
Build Log
4.5 hrs totalMay 6, 2025
Tested the main assembly. Fit check was successful, but one front edge needs a small adjustment before finishing.
What worked
Testing movement before final finish
May 5, 2025
Switching the main material to a sturdier option after the first prototype did not hold its shape.
May 4, 2025
Created paper patterns and a quick mockup. Testing scale and fit before committing to final material.
What worked
Paper pattern first, then prototype
Silverblade
Aria
2:14 PMSwitch the main blade material to Sintra instead of craft foam. The prototype isn't holding its shape.
Assistant
2:14 PMDone — I've swapped the blade core material to 3mm Sintra PVC and updated your materials list and budget.
Material updated
2:14 PMBlade Core — Sintra PVC 3mm
Material:Craft foam 6mmSintra PVC 3mm
Aria
2:16 PMWhat else do I have due this week?
Assistant
2:16 PMYou have 2 items due this week: • Source primary materials — due May 7 • Order hardware — due May 7
What should I work on next?Check my budgetSuggest material alternatives
Message your assistant...
04
Share
Share the build log with clients or other builders.
Publish progress photos, pose tests, and finish notes while keeping private costs and draft plans out of the link.
Project overviewShare linkShared viewCollaborate live
Project overview
Moonlit Ranger
In progressProgress
68%
Next milestone
Cape mockup
Due in
21 days
Budget
$168 / $300
Timeline
Ready to share
References
Front view
Back view
Cape drape
Boot hardware
Collaborators
Visibility
Share Moonlit Ranger
Invite people, manage link access, and choose shared project sections.
General access
Anyone with the link can view
Link copied
Ready to send to collaborators
Shared references
View-only board
Front view
Back view
Cape drape
Boot hardware
Foam shaping
Trim paint
Live team workspace
Moonlit Ranger
5 editingAMJRK
Shared workspaceImageNoteLinkGroup
Project reference group
Back view
Reference
Fabric drape
Fabric
Detail view
Pattern
Construction detail
Technique
Trim refs
Materials
Build note
Seal the foam edge before paint. Match trim color to the darker fabric swatch.
Seal foam edges
Log fit test
Add material cost
Supply link
Silver acrylic
Maker Supply Co.
$18
Front view
Back view
Cape drape
Drop to add 3 references
Crop image
Detail view · Adjust frame
Assembly checklist
Pre-assembly
Heat-form all panels
Test-fit shoulder piece
Sand edges smooth
Gluing order
1. Spine → 2. Panels → 3. Trim
#8B7355
Trim accentFoam armor walkthrough
youtube.com · 12:34
Weathering pigment set — 6 colors
Etsy$24
paint, weathering
Maya
Jo
References
Everyone can pin, sort, and annotate.
Ari
Mia
Jo
Ren
Kai
I want to create a
What kind of Gunpla build are you doing?
Straight builds, painted builds, weathering, kitbashes, dioramas, and commissions each need their own checklist.
~6w
3D Printing Build
Costume pieces from 3D-printed parts. Covers file sourcing, slicing, printing, post-processing, assembly, and painting to a smooth finish.
14 milestones/10 materials
Start with this template
~2w
Straight Build
A clean out-of-box Gunpla build with careful nub removal, panel lining, decals, and a final topcoat.
8 milestones/7 materials
Start with this template
~5w
Painted Build
A fully painted kit with test fitting, surface prep, priming, color separation, decals, and protective clear coats.
9 milestones/8 materials
Start with this template
~6w
Weathered Realistic
A grounded realistic finish with paint chipping, washes, grime, dry pigments, and battle-worn storytelling.
8 milestones/7 materials
Start with this template
Free tier
Start free before your next project gets away from you.
Starter is free forever: 2 active projects, 20 reference uploads, and 20 assistant messages per day. Enough to organize a real build without paying up front.
Starter includes
2 active projects for real planning and testing
20 reference uploads to keep everything together
20 assistant messages per day for project help
Upgrade only when you need more projects, uploads, or assistant messages.
Start your first buildTemplates
Skip the blank page.
Each one comes with milestones, a starter materials list, and a timeline you can customize for your build.
3D Printing Build
Costume pieces from 3D-printed parts. Covers file sourcing, slicing, printing, post-processing, assembly, and painting to a smooth finish.
~6w·14 milestones·10 materials
Straight Build
A clean out-of-box Gunpla build with careful nub removal, panel lining, decals, and a final topcoat.
~2w·8 milestones·7 materials
Painted Build
A fully painted kit with test fitting, surface prep, priming, color separation, decals, and protective clear coats.
~5w·9 milestones·8 materials
Weathered Realistic
A grounded realistic finish with paint chipping, washes, grime, dry pigments, and battle-worn storytelling.
~6w·8 milestones·7 materials
Custom Kitbash
A custom Gunpla concept combining donor kits, scratch details, seam work, paint planning, and final integration.
~8w·8 milestones·7 materials
Diorama
A Gunpla scene with a finished mobile suit, scenic base, terrain elements, effects, and display-ready photography.
~7w·8 milestones·7 materials
Everything in a single place.
References, timeline, materials, budget, build log, and an assistant that knows your project. One workspace, zero tab juggling.
Deadline
Display by Jun 1
Budget
$62 spent of $90
Next
Panel lining
MG Barbatos Lupus Rex
In progressMaster Grade kit with panel lining, flat topcoat, and custom waterslide decals.
Progress
69%
Next milestone
Panel lining
Due in
Display by Jun 1
Budget
$62 / $90
Timeline
Panel line & clean up
May 9 – May 14
Topcoat spray
May 16
Reference board
Reference
Box art pose
Color
Color guide sheet
Materials
Runner layout
Technique
Panel line detail
Reference
Action base pose
Detail
Decal placement
Color refs
12
Pattern notes
4
Materials & budget
Budget used
$62 / $90
$28 left
MG Barbatos kit
Kit
$48
Built
Tamiya panel accent (black)
Finishing
$6
In use
Build log
May 8
Snap build complete. Left arm joint is tight, may need sanding.
May 6
Inner frame assembled. Great color separation out of box.
Gunpla templates
Plan your next Gunpla build from a real workflow.
Start with templates built for Gunpla: milestones, starter materials, and timelines you can customize before the first work session.
Used by makers from r/cosplay, The RPF, Cosplay.com, r/Gunpla, and r/minipainting